Golden Series

Noncontact SPM probes NSG01 series with TiN conductive coating, resonant frequency 87-230kHz, force constant 1,45-15,1N/m.

for noncontact/semicontact modes NSG03 series with TiN conductive coating, resonant frequency 47-150kHz, force constant 0,35-6,1N/m.

noncontact probes NSG30 series with TiN conductive coating, resonant frequency 240-440kHz, force constant 22-100N/m.

Noncontact SPM probes NSG01 series with Au conductive coating, resonant frequency 87-230kHz, force constant 1,45-15,1N/m.

Noncontact SPM probes NSG10 series with Au conductive coating, resonant frequency 140-390kHz, force constant 3,1-37,6N/m.

for noncontact/semicontact modes NSG03 series with Au conductive coating, resonant frequency 47-150kHz, force constant 0,35-6,1N/m.

noncontact probes NSG30 series with Au conductive coating, resonant frequency 240-440kHz, force constant 22-100N/m.

Set of 15 High resolution long lifetime magnetic probes MFM01, MFM10, MFM_LM.

Subcategories

AFM probes for Noncontact/Semicontact Modes with wide range of resonant frequencies and force constants.
Can be supplied with Au or Al reflective coating, without tips, bare, with conductive or magnetic coating.

AFM probes for Force Modulation Mode. Can be supplied with Au or Al reflective coating, without tips, bare, with conductive or magnetic coating.

AFM probes for CONTACT modes. Can be supplied with Au or Al reflective coating, without tips, bare, with conductive coating.

Any noncontact probes provides by NT-MDT (NSG01, NSG10, NSG03, NSG30, FMG01 series) are available with one of the following conductive coating - TiN, PtIr and Au.
Please, choose the coating you are interested in and see the cantilever specificaitons which are available with this coating.

Noncontact cantilevers NSG01, NSG10, NSG03, NSG30, FMG01 series with PtIr conductive coating. Thickness of the coating is 20-30nm. Typical tip curvature radius is 35nm.
 

Noncontact cantilevers NSG01, NSG10, NSG03, NSG30, FMG01 series with TiN conductive coating. Thickness of the coating is 20-30nm. Typical tip curvature radius is 35nm.

Noncontact cantilevers NSG01, NSG10, NSG03, NSG30, FMG01 series with Au conductive coating. Thickness of the coating is 20-30nm. Typical tip curvature radius is 35nm.

AFM probes for Magnetic mode (MFM) with CoCr magnetic coating.

Noncontact/Semicontact and Contact AFM probes without tips.