Golden Series

High resolution long lifetime magnetic probes MFM01 series

High resolution long lifetime magnetic probes MFM10 series.

Low Moment High Resolution Magnetic probes MFM_LM series

High Coercivity High Resolution Magnetic Probes MFM_HC.

Contact mode probes of CSG01 series without tips, each chip has one cantilever, resonant frequency 4-17kHz; force constant 0,003-0,17N/m.
Noncontact/semicontact mode probes of NSG30 series without tips, each chip has 1 cantilever, resonant frequency 240-440kHz; force constant 22-100N/m.

Noncontact/semicontact mode probe of NSG11 series without tips, each chip has 2 cantilevers, resonant frequency 190-325kHz, 115-190kHz; force constant 5,5-22,5N/m, 2,5-10N/m.

AFM probes for contact mode CSG11 series without tips, each chip has two cantilevers, resonant frequency 7-14kHz, 14-28kHz; force constant 0,01-0,08N/m, 0,03-0,2N/m.

Subcategories

AFM probes for Noncontact/Semicontact Modes with wide range of resonant frequencies and force constants.
Can be supplied with Au or Al reflective coating, without tips, bare, with conductive or magnetic coating.

AFM probes for Force Modulation Mode. Can be supplied with Au or Al reflective coating, without tips, bare, with conductive or magnetic coating.

AFM probes for CONTACT modes. Can be supplied with Au or Al reflective coating, without tips, bare, with conductive coating.

Any noncontact probes provides by NT-MDT (NSG01, NSG10, NSG03, NSG30, FMG01 series) are available with one of the following conductive coating - TiN, PtIr and Au.
Please, choose the coating you are interested in and see the cantilever specificaitons which are available with this coating.

Noncontact cantilevers NSG01, NSG10, NSG03, NSG30, FMG01 series with PtIr conductive coating. Thickness of the coating is 20-30nm. Typical tip curvature radius is 35nm.
 

Noncontact cantilevers NSG01, NSG10, NSG03, NSG30, FMG01 series with TiN conductive coating. Thickness of the coating is 20-30nm. Typical tip curvature radius is 35nm.

Noncontact cantilevers NSG01, NSG10, NSG03, NSG30, FMG01 series with Au conductive coating. Thickness of the coating is 20-30nm. Typical tip curvature radius is 35nm.

AFM probes for Magnetic mode (MFM) with CoCr magnetic coating.

Noncontact/Semicontact and Contact AFM probes without tips.