Golden Series
Golden Series
High Resolution NONCONTACT "GOLDEN" Silicon AFM Probes NSG01 series, resonant frequency 87-230kHz, force constant 1,45-15,1N/m.
High Resolution NONCONTACT "GOLDEN" Silicon AFM Cantilevers NSG10 series, resonant frequency 140-390kHz, force constant 3,1-37,6N/m.
High Resolution NONCONTACT "GOLDEN" Silicon Cantilevers NSG30 series, resonant frequency 240-440kHz, force constant 22-100N/m.
High Resolution NONCONTACT "GOLDEN" Silicon AFM probes NSG03 series, resonant frequency 47-150kHz, force constant 0,35-6,1N/m.
High Resolution NONCONTACT "GOLDEN" Silicon AFM Probes NSG01, (resonant frequency 87-230kHz, force constant 1,45-15,1N/m
Equipped with special alignment grooves for easy chip adjustment and laser alignment in SOLVER NANO and NANOEDUCATOR II microscopes (NT-MDT Co.)
AFM Probes for contact mode CSG11 series, each chip has two cantilevers, resonant frequency 7-14kHz, 14-28kHz; force constant 0,01-0,08N/m, 0,03-0,2N/m.
High Resolution CONTACT "GOLDEN" Silicon Cantilevers CSG10 series with special alignment grooves for easy chip adjustment and laser alignment in SOLVER NANO and NANOEDUCATOR II microscopes (NT-MDT Co.)
Subcategories
Noncontact/Semicontact probes
AFM probes for Noncontact/Semicontact Modes with wide range of resonant frequencies and force constants.
Can be supplied with Au or Al reflective coating, without tips, bare, with conductive or magnetic coating.
Force Modulation Probes
AFM probes for Force Modulation Mode. Can be supplied with Au or Al reflective coating, without tips, bare, with conductive or magnetic coating.
Contact probes
AFM probes for CONTACT modes. Can be supplied with Au or Al reflective coating, without tips, bare, with conductive coating.
Conductive Noncontact/Semicontact probes
Any noncontact probes provides by NT-MDT (NSG01, NSG10, NSG03, NSG30, FMG01 series) are available with one of the following conductive coating - TiN, PtIr and Au.
Please, choose the coating you are interested in and see the cantilever specificaitons which are available with this coating.
Noncontact probes with PtIr conductive coating
Noncontact probes with TiN conductive coating
Noncontact cantilevers NSG01, NSG10, NSG03, NSG30, FMG01 series with TiN conductive coating. Thickness of the coating is 20-30nm. Typical tip curvature radius is 35nm.
Noncontact probes with Au conductive coating
Magnetic Probes
AFM probes for Magnetic mode (MFM) with CoCr magnetic coating.
Tipless probes
Noncontact/Semicontact and Contact AFM probes without tips.
Page 1 of 4








