SPECS

Features

  • Extremely low dark counts
  • Linear response due to single event counting
  • 3 MHz count rate in 2D and 2D/time resolved mode
  • Retrofitable on site, without changes to the analyzer

Features

  • Enables Higher Resolving Power
  • Increased Analyzer Performance
  • Countrate up to 15 Mcps
  • Facilitates Time Resolved Experiments
  • Snapshot capability for fast spectrum acquisition
  • Lower costs for multiplier replacements

Features

  • Bolt-on solution for PHOIBOS 150
  • 2 Spin components + 6 standard channels
  • Based on proven “Rice University” design
  • Fully integrated in SpecsLab software

Features

  • Lateral resolution < 100 µm
  • 12 bit digital camera with dynamic range of 1000
  • High quality lens system
  • Multi channel plates (MCPs) with a diameter of 40 mm
  • Detector can be retrofit on site without changes to the analyzer

Features:

  • Maximum (measured) count rate detectable is 16.8 Mcps (standard CEMs: 5.6 Mcps) per channel.
  • Linearity and non-extended dead time behavior up to 10 Mcps true count rate. Up to these count rates no significant deviation from linearity could be observed with the PHOIBOS detection system (CEMs and PCU 300 detection electronics).

Subcategories

With the highly robust STM Aarhus 150 reflecting the very successful scanning tunneling microscopy (STM) developments with the University of Aarhus, SPECS further developed this proven concept throughout their collaboration together. From the STM Aarhus 150 to the SPM Aarhus 150 , SPECS offers several highly sophisticated options within the Aarhus SPM family.

  • STM Aarhus 150 Rel.2
    Expanding the proven concept of the STM 150 Aarhus edition with permanent cooling and modified suspension system.
  • STM Aarhus 150 HT
    Dedicated high temperature version allowing to image metals and semiconductors at elevated temperatures above 1000°C
  • SPM Aarhus 150 with KolibriSensor™
    Extension for imaging insulating surfaces by non-contact atomic force microscopy (NC-AFM) with a quartz KolibriSensor™
  • Nanonis Control Systems
    Strongest emphasis on usability, stability and flexibility in SPM control systems

With these instruments developed in continuing collaboration with key scientists, SPECS guarantees dedicated SPM research possibilities in the field of nanotechnology.

 

Electron Spectrometers

 

A New Generation of Hemispherical Energy Analyzers for Electron and Ion Spectroscopy

Nanotechnology is focused on the engineering and the physical properties of small structures. Therefore techniques that have sensitivities at a scale of 0.1 nm to 100 nm are required to study these structures. Different methods of electron spectroscopy (XPS, UPS and AES) have a sensitivity in this range and are therefore key techniques in nanoscience.Thanks to our high level of expertise in electron optics and electronics we can offer electron spectrometers with the highest resolution and transmission possible.

PHOIBOS analyzers are equipped with a flange mounted detector assembly. The standard detector assembly consists of either one, five or nine single channel electron multipliers (SCD, MCD-5 or MCD-9). Our standard channel electron multipliers have an extended dynamic range for extremely high count rate applications.