One of the most useful applications of the E-Beam treatment coupled with magnetron sputtering is the creation of surface alloyes. Rather than having a thin film deposited on a surface, the machine can fuse together the substrate and the covering, creating endless possibilities.
A surface alloy is formed by alternate deposition of nanofilms onto an article under treatment and by subsequent liquid-phase mixing of the deposited nanofilm and substrate with an intense pulsed electron beam. Both deposition and mixing take place within a single vacuum cycle. As concerns its functional characteristics, the surface alloy is a coating having the required properties that essentially improve the service performance of the articles and tools. There is, nevertheless, a critical difference between a coating and surface alloy, namely, the latter has no interface with the substrate. The surface layer of a predetermined chemical composition is found to be fused into the substrate. Thus in this case, there is no distinct coating or substrate but rather a single conglomeration composed of the substrate material gradually "transforming" into the surface.

In a conventional coating there is a clear interface between the coating itself and the substrate. Using the E-Beam treatment this interface disappears. This means that it is possible to modify several properties of a surface, but also that the adhesion of the "coating" is much stronger and there is no danger of it peeling off.
![]() |
![]() |
In this examples, several alternating layers of Titanium and Zirconium were deposited onto a substrate and then fused together using the E-Beam treatment.
Steel treatment

In this example, a thin layer of stainless steel was deposited onto a substrate of carbon steel and subsequentely treated with the E-Beam to create a surface alloy, thus creating a surface with better mechanical properties and much more corrosion resistant.


