Pra.Ma.

Punte per non-contatto della serie NSG03 con rivestimento magnetico di CoCr, frequenza di risonanza 90-116kHz, costante di forza 0,5-2,2N/m.

NSG03/Co

• Standard chip size: 1.6x3.6x0.4 mm.
• High reflective Au coating (reflective property is 3 times better in comparison with uncoated cantilevers).
• Tip side of the chip is coated by CoCr magnetic coating.
• Thickness of CoCr film is about 40nm.
• Typical curvature radius of a tip: 45 nm.
• Tip height: 10 - 15 µm.
• Each chip has one RECTANGULAR spring.
• Recommended for noncontact/semicontact modes.
• Can be supplied with conductive TiN, Pt coatings.
• Calibrated SEM photo for each cantilever tip with guaranteed curvature radius 10nm or less.
• Packaged in GelPak® boxes.

GelPak® is a registered trade mark of Vichem Corporation.

Chip thickness 0.4mm Reflective side Au Spring number 1 Aspect ratio 3:1 Cone angle j <=22° Curvature radius of a tip typical 10nm

• Calibrated SEM photo for each cantilever tip and guaranteed curvature radius 10nm or less at customer's requirement ( cantilever series with letter "S" in the series name).
• Compatible with the most commercial SPM devices.
• Chemically stable Au coating.
• Silicon is doped by boron with the concentration about 5x10²⁰ cm^-3 to avoid electrostatic charges.

Recommended measuring mode N - noncontact, semicontact C - contact	cantilever series	S - with calibrated SEM photo for each tip and guaranteed curvature