|
Probes -
SNOM
|
 SNOM probes (wavelength 600-680nm), without tuning forks.
MF003
MF003 - SNOM probes, supplied without tuning forks.
| NT-MDT supply with the optical fibers with the following characteristics: |
Material - single mode optical fiber coated by aluminum
Tip diameter uncoated by Al (tip aperture) ~ 30-100nm
R curv - 50-100nm
Angle of fiber - about 20 degrees
Maximum optical input power - 400 microWatt
The probes are prepared by chemical etching method.
This method gives the optical efficiency 102 - 104 times better than those obtained by mechanical pulling. |
|
Characteristic
|
II type
|
|
Transmitted wave length, nm
|
600-680
|
|
Optical fiber core diameter, µm
|
3.5
|
|
Optical fiber cladding diameter, µm
|
125
|
|
Optical efficiency for 100 nm aperture
|
1-10x10-5
|
|
Optical efficiency for 30 nm aperture
|
1-10x10-6
|
Ordering, please, specify probe total length L and probe tip length Ltip:
Copyright© 2003, Nano Technology Instruments - Europe BV.
Copyright© 1998-2003, NT-MDT. All rights reserved.
|
